Forum Discussions (4,426)
| Discussions | Replies | Latest Activity |
|---|---|---|
How to route narrow cavitiesHi to everybody, I have to route the body of a telecaster. I have the template: I found it on the web: http://terrydownsmusic.com/Archive/… Started by Stefano in Luthier Talk |
11 |
Feb 12, 2013 Reply by Ned Knepp |
Shadow in finish. What to do?Hi I picked up a 63 Gibson J 50 as a project guitar. The guitar has various cracks and loose bracing, but most of this I can handle. The… Started by Patrick Quinn in Luthier Talk |
16 |
Feb 12, 2013 Reply by William F.Eden |
Newbie needs Yamaha acoustic repair adviceHello, I have a Yamaha FG-441S which had a heavily slotted bridge. I ordered an ebony martin-style replacement bridge from stewmac and foun… Started by John H Tischler in Luthier Talk |
6 |
Feb 11, 2013 Reply by Christian Johnson |
Little LP Swtich wiring jig.FWIW. I came up with this today. Reamed out a standard LP jack plate to hold a switch while I soldered. One snug screw and it's stable. Lea… Started by Thomas James in Luthier Talk |
2 |
Feb 10, 2013 Reply by RETROROD |
Filling rosewood saddle slot - which type glue?Saddle was in the wrong place on my old Gibson SJ. So with advice from this forum I've made a rosewook saddle blank that fits very snugly… Started by Michael Van Brackle in Luthier Talk |
7 |
Feb 8, 2013 Reply by Mark McLean |
Pick guardI have a question about a 1963 Gibson J45, but come to think of it maybe applies to most acoustics. what is the best way to bring a pick g… Started by John p pickens in Luthier Talk |
9 |
Feb 6, 2013 Reply by John p pickens |
Danelectro DC Bass TemplateHi to everybody! Does anyone know where I can find or buy the template for a Danelectro Dc Bass? It would be wonderful to find an Autocad f… Started by Stefano in Luthier Talk |
3 |
Feb 6, 2013 Reply by Robbie Collins |
wtf?Having always considered I have good intonation skills my Giannini Craviola has baffled me until yesterday...I discovered that the nut end(… Started by Tim Mace in Luthier Talk |
2 |
Feb 6, 2013 Reply by Tim Mace |
Who made this guitar? Re-Brace thoughts?I am thinking about doing a Martin or Gibson bracing on this as a project for fun. Any suggestions on which to choose? Also, were these mad… Started by David Edward Helmer in Luthier Talk |
23 |
Feb 5, 2013 Reply by Mark Pollock |
Beeswax finish - tinting optionsRead a while back about finishing a neck with 100% beeswax and a hairdryer, I think it was this forum... Anyway, I gave this a try and was… Started by Mac Walker in Luthier Talk |
12 |
Feb 4, 2013 Reply by David Edward Helmer |
© 2026 Created by Frank Ford.
Powered by
