Forum Discussions (4,426)
| Discussions | Replies | Latest Activity |
|---|---|---|
Remember Maestronet?For those of us who were active online in the 1990s, you might remember Maestronet...it was the big bowed-string discussion forum. After i… Started by Adam Sweet in Luthier Talk |
0 | Jan 29, 2013 |
New shop space!! What to do?After 17 years running my business in a 288 sq. ft. closet, I'm moving to a proper shop space of 800 sq. ft. that I'm free to configure how… Started by Mark A. Kane in Luthier Talk |
12 |
Jan 28, 2013 Reply by Mark A. Kane |
Artec passive problemsI had an artec blend/tone set up going with a humbucker and piezo, both passively wired but of course the power going to the tone circuit. … Started by Doug T in Luthier Talk |
0 | Jan 28, 2013 |
Fix color drops - guitar finishHi to everybody: I'm spraying a JB sunburst (three colors). Everything is almost perfect. "Almost" because I have two little drops of blac… Started by Stefano in Luthier Talk |
3 |
Jan 28, 2013 Reply by Eric Steven Johansen |
Music Store Bosses...Hey all. I am a new member to frets.net. Glad to be here. I work at a music store that mainly buys off the street and then re-sells to the… Started by David Edward Helmer in Luthier Talk |
6 |
Jan 28, 2013 Reply by William F.Eden |
Maple fretboard's finish comming of, yelp!Hi all, I'm new here, learnung luthier stuff. Been working on the fret ends of this fender neck, they were sticking out on both sides in s… Started by Silverburst in Luthier Talk |
18 |
Jan 27, 2013 Reply by Silverburst |
Franks side bulge jigs questionGreetings ... a while back, after seeing the idea on Franks .com site, I made a number of similar aluminum jigs to push bulged sides back… Started by onewent in Luthier Talk |
11 |
Jan 27, 2013 Reply by Eric Steven Johansen |
Does antone knoe what this is?I hesitate to ask as I know this is not a very prestigious guitar, but I liked the look of it and I think its worth saving. What I’d love t… Started by Steve Bettesworth in Luthier Talk |
22 |
Jan 26, 2013 Reply by Robbie Collins |
separating glue-joints with hot airgunI wanted to share my experience of what I see as a quite easy (and so far successeful) method of opening glue joints. It has been tested in… Started by Magnus Hultin in Luthier Talk |
22 |
Jan 26, 2013 Reply by Ned Knepp |
Exact measurements of Gibson 24-3/4" scaleCan someone tell me what the exact measurements are between the face of the nut and front edge of the saddle for both E strings on a Gibson… Started by Michael Van Brackle in Luthier Talk |
18 |
Jan 26, 2013 Reply by nathan clark |
© 2026 Created by Frank Ford.
Powered by
